Posts by Hüseyin

    The same script that works on the
    Microtracker works on the Nanotracker. Also the same microcontroller is
    used so you can use the code you developed before with some minor changes. We
    added separate switches for the cellular module and the GPS module. So now you
    can turn one off and the keep the other on and the other way around.


    We added an I2C communication bus
    between the Module and the microcontroller. So you can now exchange information
    between the 2 items. For example the module can tell the microcontroller when
    to go to sleep and for how long. Another example is to disable shutting it down
    if the device is not idle. You can also pass the accelerometer data to the
    module to use it in the python script.


    The accelerometer is different. But the
    concept is the same. We set a threshold for Activity and inactivity and have
    interrupt that indicates if the device is active or inactive.


    Yes you can use a bigger battery, but we
    added a connect for the battery. So you need to have SHR-02V-S on your battery
    or attach it to it.

    The same script that works on the
    Microtracker works on the Nanotracker. Also the same microcontroller is
    used so you can use the code you developed before with some minor changes. We
    added separate switches for the cellular module and the GPS module. So now you
    can turn one off and the keep the other on and the other way around.


    We added an I2C communication bus
    between the Module and the microcontroller. So you can now exchange information
    between the 2 items. For example the module can tell the microcontroller when
    to go to sleep and for how long. Another example is to disable shutting it down
    if the device is not idle. You can also pass the accelerometer data to the
    module to use it in the python script.


    The accelerometer is different. But the
    concept is the same. We set a threshold for Activity and inactivity and have
    interrupt that indicates if the device is active or inactive.


    Yes you can use a bigger battery, but we
    added a connect for the battery. So you need to have SHR-02V-S on your battery
    or attach it to it.

    Hi Sebastiaan,


    it is not designed for using with LiPo, it would have to much consuption.
    Headers and Jumpers are for options of TER-EZ910_V4, this could be for exaple a different Modul (2g or LTE) or from customers requested special functions.


    Regards,


    Hüseyin

    Hi albillia,


    This Terminal has a GE910-QUAD Module from Telit, so yes you can use TLS with your TER-GX910. Here you can get the User Guide for SSL/TLS.


    For you Information:
    actual FW for GE910-QUAD is 13.00.008, so you confused me a little bit when you say that you will update from 07 to 13.
    If you need it please ask at ts (at) roundsolutions.com with your customer/order number for it, thank you.


    Regards,


    Hüseyin

    Answer from our support:

    Yes, the same answer as inthe postThe module can be responsible for the data transfer but not the codec which
    need external application.



    Regards,


    Hüseyin

    Ein Auszug aus der E-Mail-Lösung:


    You should set the direction of the PIN as output before you
    can use it as an output to drive the LED. Here’s a description on it from the
    manual.





    GPIO.setIOdir(GPIOnumber, value, direction)





    This method is used to set the direction of a GPIO. The first input
    parameter GPIOnumber is a Python integer which is the number of the GPIO. The
    second input parameter value is a Python integer which is the output value. It
    can be either 0 or 1. It is only used if the direction value is 1.



    Grüße



    Hüseyin