TER-GX104S Firmware version

  • Q: Type of module? A:TER-GX104S
    Q: Firmware version? A: 07.02.604
    Q: Type of starter kit you have?
    (S1, S1B, S2, S3, S4, EVK1, EVK2, none, other)



    I am confused as to what the latest firmware is that I can use in the TER-GX104S module. It reports itself as a GM862-QUAD which is not actual listed per se in the firmware update page.


    Also will the latest firmware support the latest Easy GPRS commands?


    Thanks

  • I have seen the list and that is what prompted my question! It is not clear which firmware I can use as the module reports itself as a GM-862 QUAD and the list has 2 possible (non PY) alternatives - none of which match - so is it the GSM-862 QUADPlus OR GSM-862 QUADPlus8 ?


    The current firmware version in the module is 07.02.604.


    Are any of the GM862-QUAD modules capable of the new Easy IP commands?

  • Thank you. It appears that although this modem can support the #SCFGEXT command, it does not support the 'full' version of it. In particular I wanted to send a socket listen command, and then only receive a CONNECT rather than the SRING unsolicited response.


    Are there any of the GM862 can type modules (not terminals) that fully support this Easy IP command set?